Saltar al contenido principal

The ZTE ZMax Pro is identified by its black color, rear fingerprint sensor and its model name, Z981, which can be found under the rear case.

Preguntas 133 Ver todo

How to Remove & Replace Broken Screen?

How to repair remove a broken screen on a ZTE phone?

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 3

Comentarios:

Can You Please To Remove My Broken Screen On My ZTE Phone Please...

- de

Agregar un comentario

1 Respuesta

Respuesta Más Útil

All you need is some pry tools and the and a #00 Phillips screwdriver.

Phillips #00 Screwdriver

iFixit Opening Picks (Set of 6)

First take off the back of the cover using the pry tools

Then remove the Kapton tape ( it should be a yellow translucent tape )covering the fingerprint scanner flex cover

Unscrew the fingerprint scanner (mentioned above)

And finally, use the pry tool between the screen and the phone and go down the sides while simultaneously prying the screen away .

When you have the screen out, you can replace it by doing these steps in a reverse order

Imagen de Phillips #00 Screwdriver

Producto

Phillips #00 Screwdriver

$5.49

Imagen de iFixit Opening Picks (Set of 6)

Producto

iFixit Opening Picks (Set of 6)

$4.99

Fue útil esta respuesta?

Puntuación 1

Comentarios:

How to remove an replace broken screen face

- de

Agregar un comentario

Añadir tu respuesta

Mona estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 3

Todo El Tiempo: 1,427