Saltar al contenido principal

Segunda generación de CDMA iPad 2 con 16, 32 o 64 GB y procesador Dual Core A5. Número de modelo A1397. La reparación es detallada y requiere calor y palanca.

Preguntas 52 Ver todo

Power, volume and mute not working after flex change

I changed the screen and digitiser, in doing this tore both the wifi and the power button ribbon.

I bought 2 power button ribbons from the US but neither of them work. Is there something I might be missing?

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

1 Respuesta

Solución Elegida

Small parts tend to have lower quality levels and it's not uncommon to receive bad parts. Did the replacement part look new or did it look like it was pulled from a device? Either way, that's a distinct possibility.

I would also check the connector the flex plugs into. Depending on how you damaged the flex, you may have pulled on the connector and damaged one of the solder connections. Use this guide, if you haven't already.

Fue útil esta respuesta?

Puntuación 1

1 comentario:

The parts I bought were brand new, I tore the ribbon on the original one and had removed it properly. I've bought another one so hopefully that does the trick.

- de

Agregar un comentario

Añadir tu respuesta

S2i estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 2

Todo El Tiempo: 78