Saltar al contenido principal

Lanzado el 25 de septiembre de 2015. Modelo A1687 / A1634. La Reparación de este dispositivo es similar a las generaciones anteriores, requiriendo destornilladores y herramientas de palanca. Disponible como GSM o CDMA / 16, 64 o 128 GB / Silver, Gold, Space Grey o Rose Gold.

Preguntas 1041 Ver todo

Broke the lightning connector - parts stuck in logicboard

Hi.

My phone won't charge. I replaced the battery and the phone lasted for some time (20% remaining on new battery). Then I bought a new dock connector to try. The problem is that when I disconnected this, half of it got stuck in the connector.

Is this repairable? I have not been able to pull the parts out with my 0,8mm flat screwdriver.

Any advice and help is much appreciated!

Se link for pictures of the contact.

Thank you

https://imgur.com/a/Nyzkh

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
3 comentarios

try a set of fine point tweezers

- de

Bought some tweezers. Didn't help and I guess it's getting more and more damaged now...

Will this repair be comparable that of the Tristar replacement then? Maybe a repair shop that does microsoldering can do them both(?)

Thank you for your reply, daniel.

- de

you will just need someone that can microsolder to remove the old connector and solder on a new 1

- de

Agregar un comentario

1 Respuesta

Solución Elegida

It seems like corrosion made those connectors stick. You have to replace that connector and inspect around logic board to make sure there is no more damage on the logic board. If you are not a micro solderer id recommend finding a shop who can help!

Fue útil esta respuesta?

Puntuación 2
Agregar un comentario

Añadir tu respuesta

Bjørnar estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 105