Saltar al contenido principal

Modelo A1112 / 512 MB o 1 GB de capacidad

Preguntas 25 Ver todo

How to replace audio jack port iPod first gen - M9724LL/A

My M9724LL/A audio jack is not working properly when inserted to audio jack port. I don't know how to replace it with the new one and which audio jack port to use. Thank you in advance.

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

1 Respuesta

Hello,

The audio jack in one of these is soldered to the motherboard. Which means that you would have to desolder and then solder a new one on. Parts for this can be found on eBay but if you don't know how to solder you would have to replace the whole motherboard which is quite hard. This will also remove everything you have on the device as you wouldn't have the same memory.

Here is a guide on how to remove and replace the motherboard and also a replacement part from ifixit:

Reemplazo de la batería y la placa lógica del iPod Shuffle 1ª Generación

iPod Shuffle Gen 1 Logic Board

Hope that helped

Imagen de iPod Shuffle Gen 1 Logic Board

Producto

iPod Shuffle Gen 1 Logic Board

$9.99

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Añadir tu respuesta

Abhiraj Singh Rathod estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 2

Ultimos 30 días: 5

Todo El Tiempo: 309