Model A1046, Serial # V7340EN8NRX
I have a P/N 661-2925-R logic board in my mac, and the 30 pin keyboard ribbon connector on the board is defective. (Broken) Is there any place I could purchase this connector? I have experience in soldering these type of connectors in the past.
Es esta una buena pregunta?
Rep: 685.3mil
3.4mil
1.1mil
2.6mil
You won't need to solder it. Here's how to replace it: PowerBook G4 Aluminum 17" 1.67 GHz (High-Res) Keyboard Replacement The main problem is finding the part without the keyboard attached. I don't think there is a separate part number. I do however remember a question on this where iFixit did have the cable. I would write the and tell tthem what you're looking for here: http://www.ifixit.com/Info/contact
Fue útil esta respuesta?
The part I need is the ribbon cable socket on the logic board. It is broken and I need to solder a new one to the logic board. The ribbon cable and keyboard are fine. Just the socket to plug the keyboard into the mother board.
Rep: 1
1
I have the same problem with my PowerBook the clip broke that holds the ribbon to the logic board.
Fue útil esta respuesta?
Ultimas 24 horas: 0
Ultimos 7 días: 0
Ultimos 30 días: 0
Todo El Tiempo: 1,235
1 comentario
I have the same problem with my PowerBook the clip broke that holds the ribbon to the logic board.
- de ranjanpalm