Saltar al contenido principal

El smartphone Android de 5ª generación basado en Android de Samsung fue lanzado el 11 de abril de 2014. Las mejoras en el teléfono incluyen un escáner de huellas dactilares, cámara actualizada, pantalla más grande y resistencia al agua. Está disponible en cuatro colores diferentes; Negro, azul, blanco y cobre.

Preguntas 577 Ver todo

S5 SM-G900 Stuck on booting screen

Okay i was repairing my mother cellphone she bought a new one but i still want to get this phone working.

First the screen was cracked

I changed the LCD assembly

The rear camera wasn't working properly

I changed the rear camera

And i changed the mid-frame completely

It took around 3-4 month from start to finish since the parts were ordered from china and it got pretty long.

Then the phone will never boot completely

The furthest i can go is download mode and recovery mode

I did everything i could to soft reset it

I also downloaded the right firmware and re-flashed it

I did a full reset

Then the phone will not boot up again

I removed screen and everything just to see if every connector we're okay but it is still stuck in boot mode.

Also if i let it sit while its booting the phone is getting really hot.

Could this be a battery problem i can believe I'm throwing another 10$ on this phone.

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

1 Respuesta

Solución Elegida

Good Morning,

I'm under the impression that the phone gets stuck either on the Samsung Logo screen or Carrier Screen (AT&T, T-Mobile, etc). Best way I fixed these is via Samsung Smart Switch. Do note this will be a lost of all the data within the device.

  • Get the Model Number and the Serial Number off the device (typically behind the unit/underneath the battery).
  • Put unit in Download Mode/Odin Mode (Power button, Vol Down, and Home button)
  • Plug unit into computer > Open Smart Switch > Select More (upper right) > Emergency Software Recovery > Click the Device Initialization Tab > Enter Model Number and Serial Number.

This should take about 30 mins or so. Once the unit is finished, it will reboot. This will stay on the logo screen for a while since it's initializing applications, so be patient.

Hope this helps

Fue útil esta respuesta?

Puntuación 1

3 comentarios:

i did that twice and it didnt work

Can the LCD be faulty

Can the camera be faulty

Can the Mid frame be faulty??

Or i wait for the new battery in the mail

- de

If it's on the boot loop, it's a software issue. Maybe when you attempted the firmware update it may have done something to the OS. The best thing I can recommend is to update the firmware to it's original (phone release firmware) and try again. Updating firmware can trigger certain components to not work, so reverting to the previous/original firmware may resolve the issue.

- de

problem is that Smart Swithc tells me that my Galaxy S5 is not supported so I cannot use it.... Already done a hard reset and reinstalled samsung official software bit its stuck on Samsung Logo and keeps rebooting (it happened during samssung update) they should pay for repair since its their fault

- de

Agregar un comentario

Añadir tu respuesta

tropicana222 estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 9

Ultimos 30 días: 28

Todo El Tiempo: 3,637