Saltar al contenido principal

Lanzado el 25 de septiembre de 2015. Modelo A1688 / A1633 . La reparación de este dispositivo es similar a las generaciones anteriores, que requieren destornilladores y herramientas de palanca. Disponible como GSM o CDMA / 16 , 64 , o 128 GB / plata, oro, gris espacio, o la opcion de oro rosa.

Preguntas 2526 Ver todo

Backlight broken after screen replacement. Soldered filter no fix.

Backlight doens't worker after change of screen

Tried changing cracked screen on my own. Did not turn turn off battery before starting.

Changed the screen. No picture. Used a flashlight and saw that the screen and phone was working, but with no backlight.

I sent the phone to a repair store in Norway. The guy said to me that I broke the backlight filter. He soldered a new one. Backlight still doesn't work. He says that he didn't find any other errors than the short-circuiting of the backlight filter. He has confirmed that it gets the voltage it should get.

He also said that the the backlight went on a couple of times when he tried booting the phone a second or two before turning off.

Do you know what the problem could be?

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

1 Respuesta

From the sounds of it he didnt know too much of what he was doing or how to do it!

You can buy a backlight board from any good parts supplier. I personally wouldnt have soldered it as its close to the LCD and you dont want to damage that too.

What you need to do is disconnect the battery BEFORE anything else that you do.

I'd put a new screen on where the backlight is already fitted.


take it to somewhere else that has experience in changing screens.

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Añadir tu respuesta

Jan Hansen estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 1

Todo El Tiempo: 295