Saltar al contenido principal

Guías e información de reparación para aspiradoras Shark.

Preguntas 134 Ver todo

Shark Rocket hose broken at base

The hose where it bends from the floor cleaner to the stick is broken. Need to know where I can take it for repair in the 23464 area. I have only had this a little over two years and have never had a vacuum break when it is so new. Not happy!

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Calificación 2
Agregar un comentario

Kits de Reparación de Android

A new screen or battery is one kit away.

Comprar Ahora

Kits de Reparación de Android

A new screen or battery is one kit away.

Comprar Ahora

4 Respuestas

Respuesta Más Útil

Elizabeth Braithwaite, You could try contacting the manufacturer(1st link below) to see how well they will stand behind their product(voice your concerns of problem) or enquire of their recommended service center in/near your location. You could try to do a search in yellow pages or on the Net for local repair shop, 2nd link below may help. Good luck. I hope this helped you out, if so let me know by pressing the helpful button.

http://www.sharkclean.com/contactus/

https://www.google.ca/search?q=Vacuum+re...

Fue útil esta respuesta?

Calificación 2
Agregar un comentario

Buy a length of 1 inch/3mm uvpc pipe

Cut to fit

Insert into broken pipe

Assemble vacuum

Job done..

Much cheaper than buying a new powered head from shark

Fue útil esta respuesta?

Calificación 1
Agregar un comentario

I have owned 4 different shark vacuums and each of them have had that exact same problem. I had just been buying a new vacuum each time it happened because you have to replace the entire head of the vacuum. This time I was fed up and after seeing the same issue on every shark vacuum I have owned I decided that I was not buying yet another vacuum after only having this one for 2 years. I called shark and she said there is a warrenty on all shark vacuums but she said it didnt cover the hose in the vacuum head and you have to replace the entire head of the vacuum which she would be happy to do for 99 dollars plus tax. The cord that connects to the handle is also fraying and is about to lose connection. She said that it covered and it will cost me 19.99 plus tax and shipping. So a total of 150. That's like paying for a new vacuum. I explained that we own our ouw remodel company and that we have always used alot of their products which will no longer happen if they dont fix the 4th vacuum I have purchase and had the same issue happen. I asked to speak with a supervisor and she offered to give me the vacuum head for 50% off. So total I would pay around 80 dollars. Again I said that's not happening. She then said she would give it all to me for 50 dollars with no shipping. I agreed because I can be without a vacuum for long and I'd rather pay 50 then 200 for a new one. I will be making a complaint about this issue as it seems it happens to alot of shark vacuums and it needs to be recalled or fixed. So my advice is to call shark and throw a fit about this. Say there is alot of people that had the same thing happen. If u argue enough you could probably get it for free. For 60 dollars I have a new vacuum. The only part not new is the wand.

Fue útil esta respuesta?

Calificación 1
Agregar un comentario

Broken hose on mine. 50 to replace. Never buying shark again. After 9 months too

Fue útil esta respuesta?

Calificación 0

Comentarios:

Same here bought it 4 months ago

por

Agregar un comentario

Añadir tu respuesta

Elizabeth Braithwaite estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 Horas: 11

Últimos 7 Días: 65

Últimos 30 Días: 248

Todo El Tiempo: 3,353