Rep: 256
8
15
Replacing the LCD on the iPhone 7 plus and the screen comes on but no touch I'd or respond to the home button.
I've disassembled it a few times and put it back together but i cant find the fault.
Any one have any ideas?
Es esta una buena pregunta?
Rep: 593
6
3
The touch id button is connected over the 3d touch cable to the logicboard. This cable is very thin and fragile. You need to check this cable. It´s behind the metal backplate. You check out this iPhone 7 home button not working after screen replacement
Check my comment and you will see what I mean. To repair this you need to replace the 3D Touch.
Fue útil esta respuesta?
Rep: 123
5
Check the contact when flipping the screen back down, those two contact circles need to make a proper connection once the screen is put back on, there are two leaf clips that can be damaged opening the phone.
Hope this was helpful .
Fue útil esta respuesta?
Rep: 1.6mil
15
20
The Home button will not work when you replace a new screen even you use the old Home button, the iPhone 7 is different from other iPhones.
Fue útil esta respuesta?
Ultimas 24 horas: 4
Ultimos 7 días: 7
Ultimos 30 días: 10
Todo El Tiempo: 152
