Rep: 333
8
35
1
There are two screws on the bottom corners of the LCD bezel. A traditional screwdriver will not sit orthogonal to the screw. There are only a few millimeters of clearance.
How can I replace the LCD with/out removing the entire assembly?
Es esta una buena pregunta?
Rep: 48.3mil
7
66
97
Unfortunately, you cannot simply remove those 2 screws. You will have to remove the whole assembly anyway because the LCD has a cable that goes into the motherboard.
Here is a partial disassembly video. This model has a fan that gets blocked easily. You may as well disassemble and clean the fan while you are replacing the LCD.
Fue útil esta respuesta?
Ultimas 24 horas: 0
Ultimos 7 días: 0
Ultimos 30 días: 0
Todo El Tiempo: 107
