Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Modelo A1311 / Mediados de 2011 / Procesador Core i5 de 2.5 y 2.7 GHz o Core i7 de 2.8 GHz

Preguntas 422 Ver todo

Wont turn on. Diagnostic led no light

iMac does not power ON

Hi,

I have a Power issue with my mid 2011 iMac.

I've already opened it up. I have experience with repairing electronics, etc. But now i'm stuck. On the logic board ( Main board) :

Diagnostic LEd no light, I measure 12v and 5v on the supply.

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 2

Comentarios:

@djdanny what is the exact model of your iMac? Which one of the LED's is not coming on? what else have you checked? The more information you give the greater the chance of getting valid answers

- de

Imac 2011 mid 21,5" i5 quad core

No status led light on motherboard.

I check power cord and psu 12v and 5v

- de

Agregar un comentario

Kit de Destornilladores Manta

112 bits for every fix.

Upgrade Your Toolbox

Kit de Destornilladores Manta

Upgrade Your Toolbox

2 Respuestas

Respuesta Más Útil

@djdanny if you have no LED light up you are having problems with the PSU. You said you tested it for 12V and 5V but are not telling us where and how you tested this. At this point I would consider starting by replacing the power supply and/or double check your connections etc.

Fue útil esta respuesta?

Puntuación 1
Agregar un comentario

I have the same issue, I only have led 1 and when i press the power button - led 1 shuts off. There is a little fan spin for a millisecond.

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Añadir tu respuesta

Djdanny estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 4

Todo El Tiempo: 308