Blades on mower not engaging
murray 30 in riding mower. Model. 309029x92c3... Push lever...feel resist ance.... But nothing moving
Es esta una buena pregunta?
murray 30 in riding mower. Model. 309029x92c3... Push lever...feel resist ance.... But nothing moving
Es esta una buena pregunta?
onthehunt49 , There are a few things why your blades may not be spinning, Debri wrapped around blade spindle(with engine off,key out check for debri and remove if found) wrong belt routing, broken belt, broken tensioner, seized pulley, seized blade spindle, broken engagement cable, etc.. There are a couple links below that may aid in the repair of your mower. the 1st link show a brake down of component and where they go. the second link is just a little more on trouble shooting the mower deck. Good luck.
I hope this helped you out, if so let me know by pressing the helpful button.
Fue útil esta respuesta?
Ultimas 24 horas: 0
Ultimos 7 días: 4
Ultimos 30 días: 31
Todo El Tiempo: 4,494