Rep: 25
1
I need to replace the LED PCBoard on my electric pressure cooker as the LED display is broken. I managed to get the spare part from an appliance spares place, but now I have no idea where to open the Pressure cooker (easiest way), to swop out the old board for the new one. PLEASE HELP :-) - Cuisinart Electric Pressure Cooker CPC-600 or AEG/Electrolux EPC600.
Es esta una buena pregunta?
Rep: 685.4mil
3.4mil
1.1mil
2.6mil
I just can't find any teardowns or repair guides on this. These people sell the parts and have a toll free number and may be able to assist you: http://www.ereplacementparts.com/cuisina...
Fue útil esta respuesta?
You have to undo all the screws from inside and slide the outer case off there is a screw underneath a label and the front panel peel off label there should be to screw underneath at the top when you have done that there are 4 screws holding the panel on for the led circuit board I have done one my self so please put all the screws in a safe place as I did so you don't lose them I hope this helps you
Fue útil esta respuesta?
I hope this helps you out
where can you get the led display Pressure king pro 5l
Ultimas 24 horas: 3
Ultimos 7 días: 7
Ultimos 30 días: 30
Todo El Tiempo: 3,173
1 comentario
Where did you get the LED board?
Thanks!
- de Luis