Repara tus cosas Comunidad Tienda

Esta es la aspiradora Dyson DC 14.

Preguntas 45 Ver todo

Opciones

Reassembly of brush orientation

I quarter turned the screws and exposed the roller brush to remove built up pet hair.

When I reassembled it, the DYSON DC14 turns on but the brush roller won't rotate and their is no bottom suction.

The extended wand has suction all of the time but not the power head.

I may have disoriented the endcaps on the roller bar and would like to know proper placement.

Also, why no suction there now and how do I fix that?

Debra R

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 0
Agregar un comentario

1 Respuesta

Filtrar por:
Mas Útiles Más Reciente Más antiguo
Solución Elegida

Opciones

ruthdebra55 , Sounds like the hose/channel to the power head may be plugged, remove power head brush and see if suction port clogged and also make sure canister is locked into position correctly. Find below a guide on the power head that shows orientation. Good luck.

I hope this helped you out, if so let me know by pressing the helpful button.

Dyson DC14 Brush Bar Replacement

Fue útil esta respuesta?

Sí No
Puntuación 1

2 comentarios:

No clogs (anywhere), proper assy (thanks for that) and still brush does not rotate.

It rotates manually without any extra tension and the belt seems fine.

- de

ruthdebra55 , Thanks for replying back. Just a thought are you turning the brush control to the on position? There are 2 belts that drive the brush, the brush belt and the clutch belt. I will post a video showing how to change both belts along with a link to your manual for the DC14 which shows how/where to check when loss suction. Good luck.

https://www.youtube.com/watch?v=7_CtaFcc...

http://media.dyson.com/downloads/us/floo...

- de

Agregar un comentario

Añadir tu respuesta

ruthdebra55 estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 3

Ultimos 7 días: 13

Ultimos 30 días: 39

Todo El Tiempo: 4,358