When my phone was finished chargong the other day, I pulled the usb cable out and the flat pin from inside the charger port came away with the cable.
Is it quite easy to replace the port? I have done this with other android phones but never with an xperia
thanks
Es esta una buena pregunta?
Rep: 61
1
1
Hi Janie,
If you have replaced the charge port on another phone, you should be okay. I would recommend a good quality low melt solder paste as this will make the removal of the shielding easier. (Just remember to remove all the low melt solder before soldering the new charge port on or you will have connection issues)
Hope this helps
Fue útil esta respuesta?
Ultimas 24 horas: 0
Ultimos 7 días: 1
Ultimos 30 días: 3
Todo El Tiempo: 640
