Repara tus cosas Comunidad Tienda

Lanzado el 19 de septiembre de 2014, este iPhone de pantalla de 5.5" es la versión más grande del iPhone 6.

Preguntas 1525 Ver todo

Opciones

iPhone 6 Plus tristar replacement

Hello. I have iPhone 6 Plus and I replaced tristar to it. Before repair I tested it with multimeter for how mutch USB cable give power to the battery bracket on logigboard

Block Image

and the volt was 0.01v and with new tristar the battery bracket gived random volts wery fast 3.50v, 2.45v 1.20v etc. Do anybody have any ideas what is going on? Before repair iPhone wasn't charging or warming at all and no powered on. Screen was black and still is. I have reflowed it without any results.

Any help would be much appreciated.

EDIT 01.08.2017

With new good battery and tristar reflowed once again the iPhone works again.

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 1
Agregar un comentario

3 Respuestas

Filtrar por:
Mas Útiles Más Reciente Más antiguo

Opciones

Is that with the battery plugged in? Maybe it isn't sensing the gas gauge circuit and dropping the voltage.

Fue útil esta respuesta?

Sí No
Puntuación 0

6 comentarios:

No, the battery wasn't plugged in when I tested the bracket with multimeter.

- de

Take the gas gauge circuit off an old battery and hook the multimeter to the circuit prongs that go to the cell. Then plug it in and try and charge it, the voltage should be around 4.2v

- de

Ok. Now I tested the voltage with battery. With USB cable and without USB cable. With cable it show 2.85v and without USB cable 0.65v.

- de

Sorry I dont know what "gas gauge" means.. heh. My English is not so good :/

- de

The gas gauge is the circut between the battery cell and the logic board, it is the bottom 0.5cm of the battery. You can get it off, but make sure you don't puncture the battery.

- de

Mostrar 1 comentario más

Agregar un comentario

Opciones

1st the TriStar is not a charging IC it is a high speed switch that switches between vcc main/vccbatt it also switches cpu and baseband hence the name tri. Tigris is the charging IC. TriStar requires three voltages to function, a reverse gate handshake pin power in. If you have schematics and tools I will help you tomorrow when I am in work

Fue útil esta respuesta?

Sí No
Puntuación 0

2 comentarios:

Thank you for the information. But I already replaced the tristar and now the iPhone works. Thanks

- de

can you tell me how you solved this problem to get phone to work please

- de

Agregar un comentario

Opciones

I have iPhone 6s Plus

Its never charges after 87%, charging very slowly and battery quickly draining

What’s the reason for this problem?

What I do?

Update (01/22/2018)

yes. I already charged 3 batteries and chacked but it’s never charged fully

Never charging after 87%

Fue útil esta respuesta?

Sí No
Puntuación 0

2 comentarios:

You need to try a new battery first.

But usually slow charging and very fast draining of battery is synonym with short on the board. That would have to be considered next after trying a new battery or at least testing it with "coconut battery."

- de

I had the tri star replaced on my iphone 6s plus..now it won't power on at all any suggestions.

- de

Agregar un comentario

Añadir tu respuesta

Mobilefi estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 1

Ultimos 30 días: 1

Todo El Tiempo: 2,693