Touchscreen not work within a vertical line (Change LCD does the same)

Question

iPhone 5c

El iPhone 5c de Apple fue anunciado el 10 de septiembre de 2013. La reparación de este dispositivo es similar a los modelos anteriores, y requiere destornilladores y herramientas de entrometimiento. Disponible como GSM o CDMA / 8, 16, 32 GB / Blanco, Rosa, Amarillo, Azul y Verde

Preguntas 1233 Ver todo

Tiago @tiagoconceicao

Rep: 91

TCINF

6

4

Publicado: 16 de nov. de 2016

Opciones

Touchscreen not work within a vertical line (Change LCD does the same)

Hello,

I have a iPhone 5C with a strange problem.

Touchscreen does not work from top to bottom in a vertical line, aligned with the U key on keyboard all that line does not response to touch.

Here the things i have try:

1. With 3 Different LCD from different brands - Does the same

2. Cleaning MB ports - Still same

3. Sonic bath - Still same

4. Telescope inspection, port and circuit looks clean and stable, no marks or bend pins.

Also in addition touchscreen works by itself typing and random click everywhere - This happen sometimes, with or without plate shield on LCD and screws on of off.

Can't find a resolution... Maybe a bad cap or or component?

Anyone experienced the same problem?

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Sí No

Puntuación 0

Agregar un comentario

1 Respuesta

Solución Elegida

Minho @refectio

Rep: 221.4mil

15

289

807

Publicado: 23 de nov. de 2016

Opciones

The pictures show an awful lot of residue on the logic board. Was this before or after the the ultrasonic cleaning? The board should be perfectly clean.

If you have tried multiple LCD's and inspected the connectors then I would focus on the backside of the logic board and look at the area surrounding the Touch IC's. The iPhone 5C is susceptible to micro-fractures due to the weaker plastic housing. These are really hard to see, you need to ramp the magnification to 30X.

Fue útil esta respuesta?

Sí No

Puntuación 1

1 comentario:

Was after cleaning. It may be contact spray i don't renember.

30x is to much for my equipment, only have up to 20x.

Anyway i have returned the phone to customer, will cause more bad than good if you go mess with the MB.

It still work beside that vertical unresponsive line.

Thank you

23 de nov. de 2016 - de Tiago

Agregar un comentario

Was after cleaning. It may be contact spray i don't renember.

30x is to much for my equipment, only have up to 20x.

Anyway i have returned the phone to customer, will cause more bad than good if you go mess with the MB.

It still work beside that vertical unresponsive line.

Thank you — Tiago

iPhone 5c

Touchscreen not work within a vertical line (Change LCD does the same)

1 Respuesta

Añadir tu respuesta