Saltar al contenido principal

Released on September 19, 2014, this 5.5" screen iPhone is the larger version of the iPhone 6.

Preguntas 1468 Ver todo

Replacing rear camera lens-how to remove existing?

Ok ive seen a few videos refering to a guy using a knife to cut around the rear camera lens and then it "pops" out. This seems to be bs. The existing lens is not budging, pushing from inside face of phone hasnt moved it.

Whats the best way to get the existing lens (including steel ring) out?

Thanks

Contestado! View the answer Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

1 Respuesta

Solución Elegida

Paul, may have to use a little heat from heat gun/hairdryer. Rear lens appears to be press fit with possibly touch of sealant holding it. In the attached video it show the person pushing the lens out with a sharpy marker using moderate force to push out and the second one shows the method you referred to, using heat and utility knife blade. Check the attached video link,instruction and guide, Good luck

I hope this helped you out, if so let me know by pressing the helpful button.

https://www.youtube.com/watch?v=8NxafR4v...

https://www.youtube.com/watch?v=NUt1yQ5i...

Fue útil esta respuesta?

Puntuación 3
Agregar un comentario

Añadir tu respuesta

Paul estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 43