Repara tus cosas Comunidad Tienda

Modelo A1419 / EMC 2806 / Finales de 2014 o mediados de 2015. 3.3 o 3.5 GHz Core i5 o 4.0 GHz Core i7 (ID iMac15,1); EMC 2834 finales de 2015 / 3.3 o 3.5 GHz Core i5 o 4.0 GHz Core i7 (iMac17,1) Todo con pantallas Retina 5K

Preguntas 573 Ver todo

Opciones

Do the replacement screen have one or two connecting ribbons?

iMac 27" EMC 2546 A1419 (Late 2012)

Hello, Do these replacement screen

> 27-inch LCD LM270WQ1-SDF1 PN: 661-7169 <

come with one or two connecting ribbons?

Seem that there should be two to disconnect when on takes the screen apart but when I go to order a replacement screen, seem that they come with only one ribbon.

Shouldn't there be one for the LCD and one for the Digitizer?

For this iMac

iMac Intel 27" EMC 2546

Model A1419 / Late 2012 / 2.9 & 3.2 GHz Core i5 or 3.4 GHz Core i7 Processor

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 1
Agregar un comentario

3 Respuestas

Filtrar por:
Mas Útiles Más Reciente Más antiguo
Solución Elegida

Opciones

OK. FYI: When you buy the Screen assembly, it only comes with one connector cable, the one shown in this correct model screen assembly on the picture Jamie uploaded. The Ribbon cable to the new Screen Display port lcd cable, 98% of the time does not come with the new Screen you order and must be purchased separately only IF, your existing one is damaged. Ask the seller if they send it with the replacement screen so you are aware if to order one!

One more detail! You will need new mounting adhesive tape to reassemble your new Screen! You must buy a new set or ask the seller if they send an adhesive kit with the screen they are selling you!

This will save you time after your get the screen, so you don't have to wait again for just the Adhesive to arrive, to complete your installation!

If the existing Display port lcd cable on your existing screen is OK, you can just swap the old screen Display port lcd cable to the new Screen Assembly!

See This interchangeable ribbon Display port lcd cable here below!

The 2nd connector, the Display Ribbon!

Hope this saves reader's time/delays, money and troubles!

Fue útil esta respuesta?

Sí No
Puntuación 0
Agregar un comentario

Opciones

OK, thanks, that is what I have been seeing.

I suppose one has to take the Display Port Cable from the old Screen and swap it to the new one!

I was afraid in ordering because there are two ribbons to be disconnected but I guess this port ribbon is disconnected at both ends and is swap-able!

Thank you Jamie, that was a quick response!

Cheers

Fue útil esta respuesta?

Sí No
Puntuación 0

1 comentario:

Quick but incorrect!

- de

Agregar un comentario
La respuesta fue originalmente a otra pregunta.

Opciones

There is just one ribbon as you can see in this full assembly unit below

Block Image

Good luck with your repair!

Fue útil esta respuesta?

Sí No
Puntuación -1

3 comentarios:

It is alway good to post links to your references. We have no way of knowing where that one came from, or if it is even the correct display.

- de

Look carefully!

The image of the display unit you have in your answer has two connections. The black cable on the left is the backlight power lines not a ribbon cable. The ribbon cable is missing in this image, it connects to the top midpoint connector.

- de

Thansk Dan for the Clarification!

i got it!

The Ribbon cable is the one that comes off both ends from the old screen and placed in the new screen!

Do I have this right now? About the reuse of the Ribbon cable one!

- de

Agregar un comentario

Añadir tu respuesta

Carlos estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 2

Todo El Tiempo: 381