Saltar al contenido principal

Modelo A1312 / Mediados de 2010 / 3.2 GHz Core i3 o 2.8 y 3.6 GHz Core i5 o 2.93 GHz Core i7, ID iMac11,3

Preguntas 382 Ver todo

Smd component missing near lvds connector

A friend of mine bought a broken 27" imac. It Powers on, chime sounds, backlight Turns on nut no image. So let's open it up shall we?

I was suspecting the radeon 5750 tot be faulty but then I noticed that someone had already been fooling around.

One of the smd component underneath the lvds connector was Ripped of. I guess by removing the gpu. They probably scraped it with the bracket of the videocard. They just jumpered it with a thin wire. Does anyone Know if its a capacitor or a resistor and what value?

Block Image

Block Image

Update (09/22/2016)

if I look at te sheme, it looks more like an inductor?

I see a reference of 250ohm however, I see no mention of inductance.

Any ideas?

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

1 Respuesta

Respuesta Más Útil

@ns_ripper that is reference designator L9000 which is a 250ohm ferrite bead used for EMI control as a filter. It connects to the 12V LCD circuitry. Difficulty is that there are other values listed. Based on previous inductors, I'd go with a 1.4A 250ohm inductor and measure the distance from solder pad to pad to determine the package size. Check Digikey.com for more info.

Fue útil esta respuesta?

Puntuación 2
Agregar un comentario

Añadir tu respuesta

Jo Lodewyckx estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 1

Ultimos 30 días: 1

Todo El Tiempo: 179