RESUELTO:Ipad Display dim on one side after Glass Replacement - iPad 4

Ipad Display dim on one side after Glass Replacement

I just completed a repair of my mom's iPad 4 - The display was cracked so I replaced the digitizer and plastic ring around the outside. Part of the black dust strip was ripped so I peeled some of of it off on the lcd screen itself. Once assembled the display is dimmer down almost half the screen exactly. Is this because the black fabric / foam dust strip is removed or what else might it be?

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Sí No

Puntuación 1

Publicado: 28 de jul. de 2016

Opciones

Hey @jeremy, you'll probably have to replace the LCD connector or the board of the iPad. One of the backlight filters probably became shorted out after the replacement. Here's one tutorial you can follow for fixing the issue.

-Let me know how it goes

Fue útil esta respuesta?

Sí No

Puntuación 1

5 comentarios:

Thanks for the feedback - I'll look into this.

28 de jul. de 2016 - de jeremy

Cool keep me updated.

28 de jul. de 2016 - de iApple

Fixed - I disassembled the ipad again - disconnected the LCD cables - cleaned them and reseated them. That restored the backlight. Thanks for pointing me in the right direction. Glad it wasn't more serious as noted in the video.

29 de jul. de 2016 - de jeremy

Awesome! I'm glad I could help :)

29 de jul. de 2016 - de iApple

You would be surprised how dust inside the display connector can cause this sort of problem. I had to clean up the connector with a fine brush to get the dust out.

27 de ene. de 2019 - de Ben

Agregar un comentario

iPad 4

Ipad Display dim on one side after Glass Replacement

1 Respuesta

Añadir tu respuesta