Repara tus cosas Comunidad Tienda

Una videoconsola producida por Sony Computer Entertainment, también conocida como PS4. Anunciada el 20 de febrero de 2013 y lanzada el 15 de noviembre de 2013.

Preguntas 1700 Ver todo

Opciones

PS4 eject button not responding. Not auto-eject. Works from UI.

I think I may have bent the small piece of metal on the underside case of the PS4 while cleaning it and now my eject button doesn't work with touch. It works fine using the controller to eject via the UI.

There is a small piece of metal which connects the touch makes the connection with the sensor and I do not know what shape it is supposed to be. I have looked for photographs and videos to see what shape it would be in so I can make it right before putting everything back together. It's really hard to see if it is making contact with the sensor when I put everything back together.

Can anyone provide assistance? What is the little metal piece supposed to look like? Mine sort of looks like a 7. This is the launch edition of the console.

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 0
Agregar un comentario

3 Respuestas

Filtrar por:
Mas Útiles Más Reciente Más antiguo
Solución Elegida

Opciones

It should look almost like a triangle but with one side not touching all the way. A great way to see if it's hitting the copper pad correctly is to take a Sharpie and color the copper pad...then when you put the lower case back on there will be a mark where the metal tab touches...if it touches at all.

Fue útil esta respuesta?

Sí No
Puntuación 2

3 comentarios:

Thank you, that was very helpful for me getting it lined up correctly. Unfortunately the button still does not work. I assume something happened to the sensor when I had it apart and it is not going to be possible to fix it.

Is there a safe way to test the function of the button without having the case on? Is there anything like a cord or wire that may have come ajar, or it is likely that it just got broken?

- de

To test it without the case simply touch the copper pad on the board with your finger. That will tell you if it works or not.

- de

Can you post a picture of what the metal is supposed to be shaped like

- de

Agregar un comentario

Opciones

Just to Update too this

If The Data Cable From the Blu-ray drive isn't Connected Correctly to The motherboard the Eject button will not work just Unplug it and plug it back in :)

Fue útil esta respuesta?

Sí No
Puntuación 0

1 comentario:

I'm having the same issue and removing/reinserting the cables didn't work. It's not the button itself as touching the pad on the small circuit board gives the same 3 beeps.

- de

Agregar un comentario

Opciones

i have the same problem. I was also cleaning my ps4. I don’t believe the metal piece on the case is bent and it doesn’t seem to be the problem. When I touch the metal pad on the PS4 with my finger, there is still no beep.

I have disconnected and reconnected the data cable/s. Still nothing…

similarly to the initial post, I can eject discs using the software however nothing happens when pressing the button on the case (not even a beep).

Any more ideas?

Fue útil esta respuesta?

Sí No
Puntuación 0
Agregar un comentario

Añadir tu respuesta

Reckless Cognition estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 8

Ultimos 30 días: 14

Todo El Tiempo: 40,993