Rep: 62
5
Hi!
I just opened up my iMac 27 and put it back together. When I fired it up I heard a little "pop". Opening it up again, I can see a fuse (?) has melted near by the DP power port:
I might have been clumsy and put the cable the wrong way, making the fuse pop.
It seems like it should be replacable with a decent soldering iron. But what fuse is it and where do I buy it?
Thank you in advance
Es esta una buena pregunta?
Rep: 782.4mil
1.1mil
893
2.3mil
ulflundqvist not a fuse but an inductor. That is reference designator L9000 which is a 250 oHm inductor used as a filter. The schematic does not reference the inductance so you will have to do some checking around mouser.com or digikey as well as others.
Fue útil esta respuesta?
Order those caps too C9020, C9001 in case they are bad , make sure you order 2 or 3 of each including inductor in in case they fly of the board while your working, then you'll have to wait for more shipping these parts will be relatively inexpensive.
Totally agree with John on that one
Would this one work? http://www.digikey.com/product-detail/en...
Hard to say but it might just work. Nothing to lose at this point
Ultimas 24 horas: 0
Ultimos 7 días: 0
Ultimos 30 días: 0
Todo El Tiempo: 622
