Saltar al contenido principal

Información y guías de reparación para el iPhone 6 que salió a la venta el 19 de septiembre de 2014. Números de modelo: A1549, A1586 y A1589

Preguntas 4994 Ver todo
Pregunta Cerrada

Screen black after replacement, old screen doing the same thing.

I replaced a screen on an iPhone 6 with a new screen. As soon as I plugged in the new screen, the phone buzzed. When I went to test the new screen, the screen would not turn on. I replugged in the old screen and it would not turn on either.

The phone works fine and still buzzes when hooked up to a charger or a computer. I've tried the following with no luck:

-Unplugging the battery for awhile.

-Verified that all connectors are clean and no prongs are bent.

I've been replacing screen for a long time and have never come across an issue like this before.

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

3 Respuestas

Solución Elegida

What kind of message do you get when plugged into iTunes?

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario
Respuesta Más Útil

Well, I figured it out. When removing the cable for the screen, I somehow knocked off a small resistor on the logic board. Figured it out from YouTube with people having a similar issue. :(

Fue útil esta respuesta?

Puntuación 1
Agregar un comentario

Are you sure you are plugging it correctly? If so, you might have smashed the connectors whether on the screen or the logicboard, they are very sensible. Remember not to hold the screen in 90º with the case, or you will damage the flexs.

Do you have another iPhone 6 where you can try on the LCD?

Let us know how it goes!

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 67