Saltar al contenido principal

Sit-on-top lawn mower. Zero-turn radius mower, 50" mower deck, hydro transmission.

Preguntas 54 Ver todo

mower starts but will not engage in forward or reverse

My mower will not go forward or in reverse when moving the levers forward or backward. No symptons could be detected prior to the issue. I was mowing and starting to go in reverse and it would not go. At that time it would not go forward either.

Contestado! View the answer Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 10

Comentarios:

broken drive belt

- Por

how do you replace it.

- Por

i had a broken belt spring at the back of my Z-726X that controls going forward and backwards. Easy fix.

- Por

Agregar un comentario

1 Respuesta

Solución Elegida

I would replace the drive belt. Instructions will be in your manual. I attached an image of the instructions and the belt routing. The manual is available online at http://www.hammerwall.com/Download_Manua... little bit of an odd site, but it works :-)

Block Image

Good Luck

Fue útil esta respuesta?

Puntuación 4

Comentarios:

Checked belt, it's not broken, what else can it be

- Por

May Thigpen same mower? Same model? Same problem? what does it do? What have you checked?

- Por

my wife found a spring under the back of the mower when this happened to us. connection?

- Por

I am having the same problem the bottom pulley in the back does not turn the upper seems to turn, there was a ringing noise right before it started to act up. JH

- Por

Jesse Hubbart same mower same setup? What upper and lower pulley? The ones on the drive?

- Por

Mostrar 4 comentarios más

Agregar un comentario

Añadir tu respuesta

Danny estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 14

Ultimos 7 días: 65

Ultimos 30 días: 329

Todo El Tiempo: 75,462