Repara tus cosas Comunidad Tienda

MDR-ZX100 Auriculares estéreo de la serie ZX fabricados por Sony.

Preguntas 20 Ver todo

Opciones

No sound in left headphone after tripping over the wire

Hi, I have a Sony MDR-ZX110 Headphone, its basically new and have only used it for a couple weeks.

Last night I tripped over the headphones and after reconnecting them sound from the left side had gone. Right side is working perfectly.

I checked the entire wire and kept wiggling it starting at the port all the way up to the speaker connection, at no point did I hear any connection, as is expected with broken wires if at some point a connection is made sound may come back.

I opened the heaphones to reveal the wire connection to the speakers and tested using a multimeter the connections and the port. The left side gave no repsonse on the resistance test indicating a broken connection someplace.

Is there any way to fix this? Thank you

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 1
Agregar un comentario

2 Respuestas

Filtrar por:
Mas Útiles Más Reciente Más antiguo
Solución Elegida

Opciones

@farazk86 "expected with broken wires if at some point a connection is made" not necessarily with the type of wires used in those headphones. If the wiring is okay at the driver end, you most likely tore some wires at the connector end which is the most common cause. It is unlikely (but of course possible) that the wires broke anywhere in between. I would suggest that you replace the connector. Check this guide for the repair. Different headphones, same issue.

Fue útil esta respuesta?

Sí No
Puntuación 4

3 comentarios:

Hi. Thanks for answering. But i followed the guide but still there is nor sound in the left speaker.

I checked the wires with a multimeter. Checking the connections of the wire against the right speaker I see a reading on the multimeter but doing the same on the left speaker I dont get any response.

So I believe the wire is broken.. Are there any solutions to this?

Thank you

- de

None other than to replace the wire. You did replace the jack?

- de

You can also use a multimeter to test the wires and plugs for continuity to find what's broken.

- de

Agregar un comentario

Opciones

I have the same problem, did you find a way to fix it yet?

Fue útil esta respuesta?

Sí No
Puntuación 0
Agregar un comentario

Añadir tu respuesta

Faraz Khan estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 3

Ultimos 30 días: 15

Todo El Tiempo: 2,589