Saltar al contenido principal

Furby era un juguete robótico electrónico popular que se asemejaba a una criatura parecida a un hámster/búho que pasó por un período de ser un juguete "imprescindible" después de su lanzamiento en la temporada navideña de 1998, con ventas continuas hasta 2000. Furbies vendió 1,8 millones de unidades en 1998, 14 millones de unidades en 1999, y en total en sus tres años de producción original, Furbies vendió más de 40 millones de unidades.

Preguntas 84 Ver todo

My Furby is not moving much and goes sleeping after 1 minute

My daughter's Furby just started to make this cracking noise with every word it says. Also the Furby's moving very quietly and not moving back and forward (at all).

Usually when the Furby goes to sleep, it will bend forward. Also the its ears (SOMETIMES) are not moving forward when going to sleep.

When the Furby is awake, it will last like 1 minute and its eyes will light off (and will go to sleep). It will only wake up if I shake it well.

I also noticed that will not react fast/properly when touching him.

The reset (or the change of personality modus which ONLY WENT GO 1 TIME)won't help.

I kindly ask for help. I speak also NL, ES and IT.

Thanx!

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 2
Agregar un comentario

3 Respuestas

Block Image

My furby keeps falling asleep

Fue útil esta respuesta?

Puntuación 0

1 comentario:

There might be a loose wire. Also check the batteries. In the image that I linked there is a diagram that shows where the reset is located on your furby model.

https://static.wikia.nocookie.net/offici...

- de

Agregar un comentario

Checking the wire properly.. Some Wire burning and need to replace.. Becareful for replacement.. Very difficult.. Also checking. Dc motor running

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

The small 6V brushless DC motor went wrong.I’ve had similar issues to this as well. You can replace it with one from a PC DVD reader (the door opener motor). Shaft is smaller but it's ok, diameter is good. You’ll need a soldering gun.

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Añadir tu respuesta

Ciro Morante estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 7

Ultimos 30 días: 9

Todo El Tiempo: 1,362