Repara tus cosas Comunidad Tienda

Información y guías de reparación para el iPhone 6 que salió a la venta el 19 de septiembre de 2014. Números de modelo: A1549, A1586 y A1589

Preguntas 4994 Ver todo

Opciones

iPhone 6 not turning on - tried almost everything

Hey iFixit Team,

I purchased an iPhone 6 which was not turning on. It had a cracked screen and once opening up I could tell the battery had been replaced.

I replaced the battery and screen with genuine parts from an iCloud locked iPhone 6. I got the phone turning on but it was running slightly hot and draining faster than normal.

I restored the software from recovery mode and the problem persisted. Now the phone does not turn on after I left it dead for a while. I know I could probably get it to turn on if I put a charged battery in but I would like to fix the root cause. I have a feeling it might be a motherboard issue but would like to seek clarification and advice...

I have careful performed the screen replacement and reinstalled the battery with the proper apple adhesive strips so I should be able to get a replacement from apple if I can't get it fixed.

Thanks again,

Nick

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 0
Agregar un comentario

1 Respuesta

Filtrar por:
Mas Útiles Más Reciente Más antiguo
Solución Elegida

Opciones

Your answer lies within your question "I got the phone turning on but it was running slightly hot and draining faster than normal"

And now the battery has died it won't charge.

These are clear symptoms of a damaged U2 IC:

- Fast draining battery

- won't charge when dead

- phone getting hot

You need to replace the U2 IC, and this should solve your problem, this requires knowledge and the equipment to do microsoldering. :-)

Fue útil esta respuesta?

Sí No
Puntuación 2

3 comentarios:

Thanks for the quick reply! That doesn't sound like a repair I could perform or do you think it is worth learning? I might see if apple can replace it..

- de

It requires pretty expensive equipment, decent microscope, decent soldering iron and reflow station, decent solder and flux, etc.

You can try Apple and see if they will replace the device.

- de

Thank you, will try apple and let you know how I go!

- de

Agregar un comentario

Añadir tu respuesta

nickb1994 estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 241