Repara tus cosas Comunidad Tienda

Lanzado el 19 de septiembre de 2014, este iPhone de pantalla de 5.5" es la versión más grande del iPhone 6.

Preguntas 1526 Ver todo

Opciones

Touch ID not working

Ok so I replaced a screen on a iPhone 6 Plus everything went well. After it was done the Touch ID was not reading my finger... home button worked well and all but just wasn't reading my finger. I took it back apart to look over it and I did notice some rust on the speaker and a little bit of corrosion on the home button. I cleaned off the connector and got rid of all the rust and corrosion. Now I put it back together and still the same. I was working before the repair what could have went wrong...

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación -1

1 comentario:

What was damaged with the phone. Was it water damaged?

- de

Agregar un comentario

2 Respuestas

Filtrar por:
Mas Útiles Más Reciente Más antiguo

Opciones

Sounds like water damage to me. You could try cleaning the areas affected by rust and corrosion with 99% Isopropyl alcohol.

I would also highly recommend never to try and update or restore this iPhone or you will end up with error 53!

Fue útil esta respuesta?

Sí No
Puntuación 0
Agregar un comentario

Opciones

This happened to me as well after a friend helped me with a screen replacement.

In my case - I think - it was the home button flex cable.

After replacing this flex cable - my Touch ID is now working again.

Do not take my word for it - but if you can, open it up again and inspect flex cable - and most important - the small connectors.

Fue útil esta respuesta?

Sí No
Puntuación 0
Agregar un comentario

Añadir tu respuesta

pspgoplaystation estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 4

Todo El Tiempo: 192