Repara tus cosas Comunidad Tienda

Modelo A1419 / Finales de 2012 / Core i5 de 2,9 y 3,2 GHz o Procesador Core i7 de 3,4 GHz, ID iMac13,2

Preguntas 330 Ver todo

Opciones

iMac does not start , does not turn diagnostic LEDs

My problem is due to a 27-inch iMac Late 2012 Quad Core Processor 2.9, was replacing the HDD of this machine, the Mac I then lit the job done. Shut down your Mac and try to light again but this no longer wanted to turn more.

I have tried to make it on again, and change the power supply, replace the battery of Mother Board, Remove all electronic parts and place in anti-static bags but the iMac does not react. When connecting your iMac to the electric current, is not none of the LEDs lights of diagnotico.

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 2
Agregar un comentario

1 Respuesta

Filtrar por:
Mas Útiles Más Reciente Más antiguo
Respuesta Más Útil

Opciones

Check the wall plug. You should at least get #1 diagnostic light on if it is getting power.

Fue útil esta respuesta?

Sí No
Puntuación 1

3 comentarios:

Saw that my power cord esta working well, the perobarlo with another iMac.

Included with another probe power supply UN in good esatdo iMac .

Still not turn me any diagnostic LEDs . UN to Perform battery replacement Madre Y NO results have Baord .

Case I think it's a little more advanced by what is presented .

- de

I suspect that you got a bad replacement power supply. Use a multimeter to test if you are getting power to it. Thanks for the email and posting the question.

- de

Believe me it is a source taken from another iMac , which works in perfect condition. I think the problem esta linked to the logic board , appreciate any help from you or other members lls .

And thank you for the help .

- de

Agregar un comentario

Añadir tu respuesta

Claudio Castillo estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 1

Todo El Tiempo: 386