1 Why is my drone not flying?
It starts but won't take off?
It just flips over on the wheels and by itself it just dosent go up?
Es esta una buena pregunta?
Puntuación
13
277561
12 Respuestas
Respuesta Más Útil
Rep: 73
1
1
The proppellers are mounted in the wrong order. Switch left and right propellers front and back. Had the same problem. The drone was pushing down instead of moving up
Fue útil esta respuesta?
Puntuación
6
Hi thanks God bless you it works i thought my new drone was spoilt i came here read your started my drone and it came i recommend this to everyone IT WORKS
hello, thank you your suggestion works
Thanks a ton! UDAMAN
Top man. It's working now :)
Rep: 49
1
Two propellers angle up and two angle down. Align then in a cross cross pattern so:
front left angle up - front right angle down
back left angle down - back right angle up
Fue útil esta respuesta?
Puntuación
4
Thank you so much. This is exactly right!
OMG this was helpful!!! Thank you!!!
Thanks it works perfectly
Rep: 25
1
Keep switching the propellers and trying it until you get the correct order
Fue útil esta respuesta?
Puntuación
2
ok thank you
I have the same issue
But I figured it out one of your PROPELLERS might be WEAKER than the other ones allowing it to be UN-EVEN. For mines that's what it is but I might need to buy new propellers if you can do that
Fue útil esta respuesta?
Puntuación
0
i bought new propellers it still doesn't work
yes thats all it does and dont come off the grown just flips foward
Fue útil esta respuesta?
Puntuación
0
My drone typhoon h is not responding to the monitor
Fue útil esta respuesta?
Puntuación
0
My typhoon h drone camera is nor responding to the monitor
Fue útil esta respuesta?
Puntuación
0
No.it goes on it's side. And doesn't fly. It's not mine. It's a friends drone I was using
Fue útil esta respuesta?
Puntuación
0
The wings are rotating but it doesnt fly
Fue útil esta respuesta?
Puntuación
0
Rep: 1
1
1
I had the same problem. I had to put the propellers on again after a crash and I just installed them on the wrong motor. Once in the right position it works like it’s supposed to. Good Luck!
Fue útil esta respuesta?
Puntuación
0
Check the direction of the props. They might have gotten reversed and the 2 same angle props go diagonally to each other
Fue útil esta respuesta?
Puntuación
0
if you press the takeoff button then try lifting up it should work
Fue útil esta respuesta?
Puntuación
0
my parrot rolling spider never failed so theirs should be a priority
8 comentarios
Mine has the same issue, its like the propellers are revered. It wont take off, it will only only push downward into the ground, its unusable!
- de Chris Plaat
I have the same issue
- de Vincent
same issue anyone know why?
- de Kai Moseley
me too it just spins backwards all by itself when you take it off on the weels for a few seconds and i think it has to do with balanced weight but at the moment im still trying to figure out whats wrong
- de Tristan Studios
I have the same issue
- de alexkiki01
Mostrar 3 comentarios más