Repara tus cosas Comunidad Tienda

Información y guías de reparación para el iPhone 6 que salió a la venta el 19 de septiembre de 2014. Números de modelo: A1549, A1586 y A1589

Preguntas 4994 Ver todo
Pregunta Cerrada

Opciones

Sensor/FrontCam Flex suddenly dead after screen replacement

Hello!

I have replaced a bit over 100 iPhone 6 screens now and about 5 of them the sensor flex has just died out of nowhere!

Sometimes the proximity sensor stops working completely or if won't transmit any sound to the earpiece/receiver. Never had any problems with the camera tho.

And its not that I just place it wrong it really breaks!

Very annoying but thankfully not that common. NEVER had this problem on a 5 or 5S

Anyone know what might be the cause of this? Maybe the p-sensor is sensitive and is damaged even though I handle it with care, but the sound??

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 0
Agregar un comentario

1 Respuesta

Filtrar por:
Mas Útiles Más Reciente Más antiguo

Opciones

It's the alignment of the proximity sensor most of the time also make sure the little black square piece of rubber is seated where the sensor goes.

If it still does not work u need to replace the sensor as taking it off, no matter how gentle you are will cause the problem. Remember it's a fragile flex cable

Fue útil esta respuesta?

Sí No
Puntuación 0

1 comentario:

It is not a question about the alignment I know all la about placing. the sound really breaks.

Yes ok sensitive p-sens might break more easily but sound should still work.

I was one of the first to replace a screen here in Sweden I have done it hundreds of times after that.

- de

Agregar un comentario
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 92