Saltar al contenido principal

Guías para la versión Wi-Fi del iPad Mini 2. Anunciado el 22 de octubre y lanzado el 12 de noviembre de 2013. El iPad mini 2, también conocido como iPad mini con pantalla Retina, tiene todos los píxeles del iPad Air en un tamaño más pequeño de 7.9" factor de forma.

Preguntas 220 Ver todo

Missing solder pad on Touch screen connector iPad mini 2

Hi guys,

We have a problem.

A customer brought an iPad 2 mini. I disassembled ipad, and I realized the touch screen connector was damaged. I removed the connector with solder iron, but one of the solder pad are missing.

what is the solution ?

thanks

Tibor

picture:

Block Image

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 1
Agregar un comentario

3 Respuestas

Solución Elegida

This is all wrong !!! The missing pad is 5th pad !! 5 NC - no connection !!

Block Image

Yellow selection is pad 6,

Block Image

oldturkey :D

Fue útil esta respuesta?

Puntuación 2

7 comentarios:

@fixlab excellent job in finding this. Amazingly enough it took a year for somebody to catch this error. I did correct the original answer.

- de

@fixlab I have the same problem. The pads number 5, 15, and 17 are missing. Colud you help me with the schematic picture? Where could I connect the missing pads? Thanks!

- de

gabor, pin 5 is nc, pin 15 is ground and 17 you can connect to the large cap to the left side of the connector. on the right side of the cap

- de

Thank you daniel!

- de

Mostrar 2 comentarios más

Agregar un comentario
Respuesta Más Útil

Iphoneszerviz Szeged, correction. That is contact #5 of J1700. It does not need anything. NC no connection

Block Image

Fue útil esta respuesta?

Puntuación 6

6 comentarios:

Very useful, Thank you!

- de

By placing a jumper from the cable to the board?

- de

thank you old turkey, :)

- de

@oldturkey03 extremely grateful!

- de

@iphoneszerviz, did you manage to repair this? Can u post a pic or explain a little what you had to do exactly? We are facing a similar prblem ourselves with the exact same pad ripped off during a connector replacement

- de

Mostrar 1 comentario más

Agregar un comentario

Iphoneszerviz Szeged,

try to use best or recommended rework tools when you touching high tech logic boards. Here i can see one path Path damaged on your logic board.

you have two options,

1) Change the new logic board

2) Path modification : check the path destination and you may have to connect them physically

All the best!

Fue útil esta respuesta?

Puntuación 2

3 comentarios:

circuity diagram available this iPad?

- de

creativeelectron (http://creativeelectron.com/) seeking your support to find path of 8th contact - TP

- de

jessabethany, seeking your support as well

- de

Agregar un comentario

Añadir tu respuesta

Iphoneszerviz Szeged estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 7

Todo El Tiempo: 4,729