Repara tus cosas Comunidad Tienda

La segunda generación del iPad con modelos Wi-Fi, GSM y CDMA. Algunos modelos se actualizaron antes del iPad 3. La reparación es difícil y requiere calor y palanca.

Preguntas 730 Ver todo

Opciones

Black Screen Apple Symbol very very dim

I have a generation 2 Ipad A1395. The screen is black with the apple coming on and then going VERY dim to where I can barely see it.

I have tried the TAP TAP TAP trick.

I have held down to do a reset.

I have plugged it into the computer while holding the button.

I have put a plastic piece under the area inside the Ipad where it is supposed to be helping with the dim feature.

I have REPLACED THE LCD screen.

Nothing I have done has obviously fixed the problem.

Where do I go from here?

Any help would be great!

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 0
Agregar un comentario

2 Respuestas

Filtrar por:
Mas Útiles Más Reciente Más antiguo
Solución Elegida

Opciones

Well, if I have to guess: if resetting (Power + Home Button pressed together for ~15 seconds) doesn't bring back the normal level of light;

AND, replacing the LCD cable then the LCD itself doesn't solve it;

Then you probably have an issue with the board / the backlight circuit.

Proper troubleshooting should be done at board level (LCD connector, filters, diodes, etc.)

If you have the schematics, the tools, and the needed knowledge to troubleshoot the board, this is the way to go.

If not, you will have to send it out or take it to someone who has the knowledge and the tools. If you need advice as to who may be able to fix it for your, let me know where you're located.

Fue útil esta respuesta?

Sí No
Puntuación 1
Agregar un comentario

Opciones

when did it start? When you were doing a digitizer replacement? Sounds to me like you may have burned up the backlight filter.

Fue útil esta respuesta?

Sí No
Puntuación 0

2 comentarios:

My mother-in-law gave it to my wife and it worked fine for awhile. Then it went weird. I could lay it on my lap, tap the back and it would come back on. That worked for awhile, but now nothing happens. what/where is the backlight filter?

- de

thats odd, thats not how a backlight filter will act. once the backlight filter is blown, its toast, no intermittent function.

The backlight filter is on the board near the edge of the shield. google it. Its not likely a DIY repair.

- de

Agregar un comentario

Añadir tu respuesta

sam estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 1

Todo El Tiempo: 197