Rep: 125
2
I think I need to replace the backlight filters. I've read plenty about where they are on the iPhone 5 but can't find anything on the iPhone 5s. Can anyone tell me where they are on the board and where I can buy them? Is this all I will need to replace or should I also replace the coil and ic chip.
Thank you in advance!!
Es esta una buena pregunta?
Rep: 782.4mil
1.1mil
893
2.3mil
I'd check around FL24, FL25, FL26 as well as the capacitors C17, C243 and C18.
Fue útil esta respuesta?
Thank you! This was exactly what I was looking for. Do you know where I can buy the filters and capacitors?
Looks like they are all in stock a digikey.com
Thanks oldturkey03. Is this the part for the filter? FILTER CHIP 120 OHM 3A 0603
Found it (I think) - FERRITE CHIP 220 OHMS 2.0A 0603
susan, the three filters are 240 OHM 0.2A 0.8 OHM in a 0201 (0603 metric) package. Available at places like this http://www.digikey.com/product-detail/en...
Rep: 85
1
Probably not the cheapest solution, but perhaps consider replacing the entire display assembly, digitizer en all. It's a Much Much easier job.
Fue útil esta respuesta?
I already tried that. I can see the apple logo, barely, using a flashlight pointed at the display, so I think the backlight filter is blown. I'm up for replacing it/them. Can solder, just don't know where they're located. Plenty of info on the iPhone5, not much on the 5s.
Thanks!
Ultimas 24 horas: 0
Ultimos 7 días: 0
Ultimos 30 días: 0
Todo El Tiempo: 2,307
1 comentario
You have micro soldering skills and tools?
- de Rany