Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Pantalla iPad Mini de 7.9 pulgadas, con 16, 32 o 64 GB de almacenamiento.

Preguntas 775 Ver todo

Touchscreen Replacement Acting Erratically

Hi,

I just replaced the touchscreen on an iPad Mini.

The repair was done with the utmost care, but once laying the digitizer back down flat on the chassis, the touchscreen starts to register jittery and random input.

Once the touchscreen is lifted off the chassis, the problem goes away. Seems to be only when the digitizer makes contact with the aluminum frame.

If any one has any information on why this is happening and any possible fixes I would be very great full.

Thanks!

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 1
Agregar un comentario

1 Respuesta

Hello Lee,

This problem is caused either from;

Defective Glass

or

The strip of "padding" on the lower side of the LCD not being removed. I do not understand why you have to remove this padding, but you do. It looks like 5-6 (I don't remember the number in my head really..) cushions on a strip of tape that is very easily removed. (I believe there is one strip on each side of the LCD)

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Añadir tu respuesta

lee estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 130