Saltar al contenido principal

La consola de juegos Xbox de tercera generación de Microsoft, lanzada el 22 de noviembre de 2013.

Preguntas 483 Ver todo

Replacing bluray drive with external drive?

My grandsons console was run over (true) opened everything up and only damage is the ribbon at front of console (easy repair)a very distorted case and smashed optical drive. Console boots up fine and responds as expected, because the case is so distorted I can't install a replacement optical drive, my question is can an external blu ray drive be used or a generic drive placed in the case if the damaged metal was removed and the case modified to suit.

Contestado! View the answer Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

Kits de Reparación de Android

Estás a un kit de tu nueva pantalla o batería.

Comprar Ahora

Kits de Reparación de Android

Estás a un kit de tu nueva pantalla o batería.

Comprar Ahora

3 Respuestas

Solución Elegida

The main problem you are going to run into with anything like this that you try is that the blu ray drive that came in the unit from the factory is married to the motherboard. There is a PCB that is inside the blu ray drive that must stay with the motherboard. This means that you can replace the optical drive with an identical one but you must also switch the PCB on the new drive with the one that is matched to the motherboard.

Unfortunately there is no way to replace the blu ray drive with anything other than the exact type that came with the Xbox One.

I hope this helps.

Fue útil esta respuesta?

Puntuación 5

Comentarios:

Have you done this yourself because i can find no evidence of this actually working. It did on the 360 but i cannot find one mention of it working on the xbox one

by

Yes, my company replaces blu ray drives and it works fine. You probably won't find this anywhere out there because there's just not that much info about these out there yet.

BTW, I would never knowingly give people advice that is not correct or that I have not tried myself.

by

Ok. One more question.I am not good at soldering so I was thinking when I remove the old board I would leave as much of the two soldered cables as possible and splice/patch the cables rather try to solder the boards. Any thoughts on this.

by

Huh? The daughter board is soldered to a motor within the drive!

by

perrypk...YES you are right...I totally got this question confused with another one that I was answering reguarding a PS4 optical drive...those are located on the top of the optical drive. You are correct though in stating that the board for the Xbox One is inside the drive itself! Sorry for anyone who was confused by my comment!

by

Mostrar 1 comentario más

Agregar un comentario

Resoldered the cables reassembled perfect drive wont turn on? I bought a reman drive and followed the ifixit guide and another youtuber for the soldering.

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

interesting info so if the xbox drive is married to the motherboard and there is an electronic fault with the drive like mine there is no point in swapping the board over to a new drive they dont state this on amazon does this mean all of those drives on amazon are useless and wont work i was thinking of external usb player but it looks like they have taken care of that idea and that wont work either i am now thinking of putting a bluray player in my computer to copy the game files to a flash drive i bet i cant lastly where and how would you get a married to the motherboard replacement bluray player ALF CRUNCHBUCKET

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Añadir tu respuesta

Alex estará eternamente agradecido.
Ver Estadísticas:

Past 24 Hours: 9

Past 7 Days: 71

Past 30 Days: 228

Todo El Tiempo: 17,062