Canon 60D blueprint/guide on building the chips and motherboard?

Question

Canon EOS 60D

La Canon EOS 60D es una cámara DSLR (réflex digital de lente única) de 18 MP con una pantalla LCD articulada. La cámara fue lanzada en agosto de 2010 y se identifica por la EOS 60D impresa en la parte frontal de la cámara.

Preguntas 56 Ver todo

Caleb @caleb90885

Rep: 13

1

Publicado: 21 de ene. de 2015

Opciones

Canon 60D blueprint/guide on building the chips and motherboard?

I tried to fix a stuck shutter button, and used a contact lenses cleaner liquid to pour in it according to a recommendation online...Well, that was a bad idea, now my camera doesn't work at all. It won't turn on. I'm guessing the chip or whatever it's called, got shorted. What I'm asking is where can I view the blueprint and find the name of each chips (or board, or whatever you call it inside the camera) so I can order the correct parts I need. I know that it's not recommended that I take apart my camera, but I've done that multiple of times. It's just expensive to send in my camera for diagnosis and repair.

I've tried to find it by googling but I'm totally out of luck!

Any help will be greatly appreciated!

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Sí No

Puntuación 1

Agregar un comentario

2 Respuestas

Eric D @ericd63724 Rep: 1.2mil 12 7 3 · Answer 1 · 2015-02-17T20:26:26-07:00

Eric D @ericd63724

Rep: 1.2mil

12

7

3

Publicado: 17 de feb. de 2015

Opciones

I dont think you will find one, but I dont think you need it.

Where did you pour the cleaner? Did you use electrical contact cleaner, or eye-contact cleaner?

If its a little electrical contact cleaner, you will need to do a full dismantle, wipe up, and reassembly.

Fue útil esta respuesta?

Sí No

Puntuación 0

Agregar un comentario

o0smitters0o @o0smitters0o Rep: 1 · Answer 2 · 2015-09-10T08:23:12-07:00

Since you've taken the motherboard out, you should put it all back together. Then make guide on removing motherboard. Did you take batteries out when trying to unstick button? Eric has good point about contact cleaner. I started using custom configurations for camera action. Turning off the half press to start auto focus and instead I use AF-ON button on back to start Auto Focus. Makes it faster and easier to use. Then you are all ways depressing shutter button all the way. So no sticky gets stuck in middle. Hope you get it worked out. You may find a beaten up 60d and use it for spare parts. Have you tried calling Canon service or local camera shop. A lot of those guys are always willing to talk shop. If you do get info post it please. Good Luck!

Canon EOS 60D

Canon 60D blueprint/guide on building the chips and motherboard?

2 Respuestas

Añadir tu respuesta