Saltar al contenido principal

Identifying capacitors marked 10.0 and 100 V on my amplifier?

I have a JL Audio 500_1 V2 Car Audio Amplifier. Try as I might, I cannot find replacement capacitors for my JL Audio 500/1 V2 amp. A large resistor overheated and failed, damaging a few nearby components.

The one component that I cannot find to repair the amp is a large capacitor. There are actually two of them on the PCB.

If anyone can help me locate this capacitor, I would really appreciate it. The back one is damaged badly, and I'd really like to repair the amp and keep using it. Thanks!

http://i.imgur.com/EeZYFMa.png

Block Image

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0

3 comentarios:

Take a picture straight down of the affected area and post it. what is the logic board reference designator for the component?

- de

They are C520 and C521. Can't take a good photo at the moment.

- de

Did you end up finding them?

- de

Agregar un comentario

1 Respuesta

That looks like a ceramic capacitor. The 10.0 refers to 10 micro farads and the 100V refers to 100 volt breakdown voltage. The J is the tolerance, which is +/-5%. The FMK markings are probably manufacturer codes.

Fue útil esta respuesta?

Puntuación 0

1 comentario:

jeromyrew1 take a look at the right side of the capacitor that you described. What do you make out of that?

- de

Agregar un comentario

Añadir tu respuesta

Jared estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 4

Todo El Tiempo: 435