I have a MacBook Pro 15" Non-Unibody model and I would like to jump-start the computer.
Now there is no keyboard, so there isn't a power button, and I would like to turn on the computer.
How would I go about doing this?
Are there power pads that I need to short?
Thanks.
Es esta una buena pregunta?
Rep: 783.7mil
1.1mil
894
2.3mil
Matthew, connect a USB mouse. Short the power on pads on the logic board to boot the system and use the mouse to put the system to sleep from the menu.
Fue útil esta respuesta?
Rep: 479.7mil
35
329
971
Here's a good reference on the power pads: Turning on MacBook Pro without power button.
You can also jump the button wires from underneath the upper case.
As to turning the system off, you should be able to use a USB connected mouse to use the shutdown menu choice.
Did you test the power button with a continuity meter or Ohm meter to see if that was the problem.
Fue útil esta respuesta?
My macbook pro is a Non-Unibody model, not a Unibody.
Where would I find the pads on the 15" Non-Unibody Model?
Ultimas 24 horas: 1
Ultimos 7 días: 3
Ultimos 30 días: 3
Todo El Tiempo: 3,525
5 comentarios
Matthew, yes there are. what is your computers serial number? With that we can identify exactly what hardware configuration you have and can show you where they are.
- de oldturkey03
The serial number is: W861527FVJ0
- de Matthew
Also how would I go about turning it back off?
- de Matthew
MacBook Pro 15" Core Duo 1.83 GHz Specs
- de Dan
Where on this page might I find the location of the pads?
- de Matthew