Saltar al contenido principal

Repair and disassembly guides for Lexmark printers.

Preguntas 22 Ver todo

Lexmark Genesis s816 has slowed to a crawl

After several years of very successful use, my multifunctional device slowed to a snails pace when printing anything. It takes over 4 minutes, for example, to print a test page. What could be the problem?

The device is running the latest firmware.

Thanks, Anna

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Calificación 1
Agregar un comentario

Kits de Reparación de Batería de MacBook Air

A partir de $69.99

Buy Now

Kits de Reparación de Batería de MacBook Air

A partir de $69.99

Buy Now

1 Respuesta

HOW TO FIX LEXMARK GENESIS SLOW PRINT

I have also had a lot of problems with slow printing of and on. Never had time to look into the problem until now.

- First try closing network/wifi connection via the display on the printer.

- Power off the printer.

- Close any wifi or other network connections you have been using for the printer. Like a router, mobile device etc.

- Use the USB cable ONLY for printer connection.

Now power the printer on again.

- Make sure the wifi-icon on the display HAS the yellow triangle warning. If not start over again from top.

- Test printing again.

If the problem persists update drivers etc.

Fue útil esta respuesta?

Calificación 0
Agregar un comentario

Añadir tu respuesta

belkjab estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 2

Todo El Tiempo: 121