Saltar al contenido principal

Repara tus cosas

Derecho a reparar


Segunda generación de iPad con Wi-Fi, lanzado el 11 de marzo de 2011. Número de modelo A1395. La reparación es difícil y requerirá calor.

Preguntas 330 Ver todo

Brainstorm: iPad2 was dropped, now black LCD but backlight works

A dropped iPad 2 has been brought to me by a client. LCD screen is black but backlight turns on. I did some research and it seems there are two reasons this is happening: 1. The LCD is bad, or 2. The logic board has a broken circuit or jumper that needs to be bridged/resoldered. I really don't want to have to open it unless I know for sure what I need to fix. Can a backlight still work if the logic board is the problem? Is there anything I can try, short of opening it up, that can help me pinpoint what the solution would be? I don't have the proper soldering equipment yet, so I don't want to open it and then realize I'll have to send it out for resoldering. Thanks in advance.

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 1
Agregar un comentario

2 Respuestas

Respuesta Más Útil


I can't understand you well. The screen can't be black if the back-light is working.

You can't be absolutely sure without opening and replacing the LCD display.

Yes, there is solution for a not working back-lights. You must replace or make a jumper for one coil. But this is solution for not working back-lights. In this situation you can see an information on the screen from a specific angle.

But if you haven't information on the screen and if this happens after a hit, 90% the problem is with LCD display. Inspect the LCD from different angles. Maybe you can see a small rift somewhere.

Without opening and testing with another LCD you cannot be sure where is the problem.


Fue útil esta respuesta?

Puntuación 1
Agregar un comentario

Hello this can be simply fixed by opening up disconnecting the lcd and reconnecting and in most cases it will turn on with no problems..

This is a common fault in the iPad2 with the lcd disconnecting when dropped..

I'd it doesn't work then next step is a lcd replacement if a new lcd doesn't work it's a board problem..

Only way to find out is to get stuck in and open it up..

Don't understand why you won't open it up and troubleshoot the problem

Fue útil esta respuesta?

Puntuación 1
Agregar un comentario

Añadir tu respuesta

PCHookups estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 747