Saltar al contenido principal

Resolución de pantalla del modelo A1046 o A1095 / 1280x854

Preguntas 118 Ver todo

Why does my screen scramble after a short period of use?

My laptop has worked well since new but late last year the screen began to show unstable signs, gradually getting worse until it was impossible to use.

The screen developes a sort of coarse pixellated look and is difficult to read. After a short time as if reaching a certain temperature, these coarse pixel or really they're blocks of pixels worsen, making it useless.

Our local Apple repair centre had a look and diagnosed a fault on the motherboard which are either not available as a replacement part or expensive enough to make it an unattractive repair proposition. The tech said he'd never seen the like before. The model number is A1046 with a 1.25GHz processor.

Since then I've bought a M1138 1.67Ghz, which I believe to be the last Aluminium model (1440x960). Touchwood, flawless and a delight.

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación -1
Agregar un comentario

1 Respuesta

Solución Elegida

Your GPU

Graphics Processing Unit (chip) is failing at the solder joint. It's life can be "extended" temporarily with reflowing the solder using a couple of methods, or repaired re-balled (re-soldered) professionally (expensive).

You might try this: http://www.ehow.com/how_5009395_install-... solution.

If this answer is acceptable please return and mark it.

Good Luck,

N.

Fue útil esta respuesta?

Puntuación 2
Agregar un comentario

Añadir tu respuesta

Robert Bryce estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 3

Ultimos 30 días: 4

Todo El Tiempo: 965