Saltar al contenido principal

Repara tus cosas

Derecho a Reparar

Partes y Herramientas

Segunda generación de iPhone. Modelo A1241 / 8 o 16 GB de capacidad / plástico negro o blanco de nuevo. La reparación es más sencilla que el primer iPhone. Requiere destornilladores, curvas y herramientas de succión.

Preguntas 1505 Ver todo

Why is my screen is black after replacing the lcd and digitalizer?

After putting the phone back together the screen is black. The vibrate function is working. I replaced the lcd screen and digitalizer on it because it got dropped.

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 1

Comentarios:

hey man... im having the same probem.. did u happen 2 fix this ?

thanks in advance :)

- Por

Agregar un comentario

2 Respuestas

Respuesta Más Útil

The first course of action is to double check the display connectors. I know this sounds dumb, but you'd be surprised how often this can fix the problem. Which version of iPhone do you have (original, 3G, 3GS)?

Fue útil esta respuesta?

Puntuación 2

Comentarios:

it is a 3g and i did check the conections again and that didn,t help

- Por

Agregar un comentario

if all is ok with the connection and the LCD. you certainly don't power off yr idevice when you open it.

1 dl Recboot

2 enter recovery mode

3 exit recovery mode

Fue útil esta respuesta?

Puntuación 0

Comentarios:

can you explain your answer?

- Por

Don't know why but a recovery of the iphone fix this problem : black screen LCD when you put it on a iphone not plugged off.

For not lost data just turn your iphone into recovery mode and escape from recovery. (Recboot is perfect for that)

i have this problem on many iphone 3G, 3GS i've repaired and i have fixed this problem like this.

soory for my poor english

JC

- Por

just wondering why you don't have to power off? mostly black lcd recovers from a hard reset with home and power for 10sec. thought you might have a magic answer for why you needed to do the recboot...

- Por

Some time forgot to turn power off or put it on accidentally during repair.

The only reasons why i use recboot it's to not have to lost the data with a DFU.

- Por

Agregar un comentario

Añadir tu respuesta

lennox estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 4,407