Repara tus cosas Comunidad Tienda

Todos los destornilladores fabricados por iFixit y vendidos en iFixit.com

Preguntas 22 Ver todo

Opciones

Are the TR10 and TR8 screwdrivers interchangeable with T10 and T8?

Hi!

Thank you for your great guide! I have a question regarding the Torx screwdriver sizes. I own a toolset that includes T6, T8, and T10 sizes as well as a few others. In your guide, it is listed that a "TR10" and a "TR8" screwdriver is needed. After watching several videos pertaining to hard drive replacement, many people claim that they are using the standard T10 and T8 sizes. Is there any difference between the "TR" labeled screwdrivers and the standard "T" ones? I don't want to have to buy these two screwdrivers if the ones I currently own will work. Please advise. Thank you!

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 4
Agregar un comentario

1 Respuesta

Filtrar por:
Mas Útiles Más Reciente Más antiguo
Solución Elegida

Opciones

Here's a breakdown of the more common bits:

Block Image

The TR (Tamper Resistant) Trox screw has a pin in the middle of the hole so a standard Torx bit can't grab the screw.

Fue útil esta respuesta?

Sí No
Puntuación 6

3 comentarios:

Thanks! Great diagram. I just put in an order for the TR Torx screwdrivers.

- de

The TR drivers might be able to work with standard Torx screws, but not visa versa. In about twenty years of working on Macs, I have never actually needed any of my TR drivers. None of the repair-guides I have found acutally calls for a TR driver - perhaps Sebastian has encountered a typo?

- de

Johann, Mac Mini 2018 is using TR6 screws.

- de

Agregar un comentario

Añadir tu respuesta

Sebastian estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 8

Ultimos 7 días: 49

Ultimos 30 días: 222

Todo El Tiempo: 22,884