The right dome of my headset doesn't work properly. It is dependent on angle of the cable. It does work if I hold the cable (seen in the picture with my hand and an computer screen) at an angle. I was wondering how/if it is possible to fix this. Edit: Currtently using the following
low tech solution but might need a better one in the future.
Es esta una buena pregunta?
Rep: 782.4mil
1.1mil
893
2.3mil
SelonNerias, sounds like either a broken wire or bad solder connection on the inside of the dome. I would disassemble the dome and check the contacts on the driver. Resolder those to see what happens.
Fue útil esta respuesta?
Ultimas 24 horas: 0
Ultimos 7 días: 0
Ultimos 30 días: 7
Todo El Tiempo: 488
