Saltar al contenido principal

Segunda generación de iPhone. Modelo A1241 / 8 o 16 GB de capacidad / plástico negro o blanco de nuevo. La reparación es más sencilla que el primer iPhone. Requiere destornilladores, curvas y herramientas de succión.

Preguntas 1169 Ver todo

Turning on....

Hi All,

I have just replaced my front panel, following the step by step guide. Once completed i have tried to turn the phone on.... but nothing?

I can hear the standard tone when you connect a charger but nothing else?

Help please...

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación -1
Agregar un comentario

2 Respuestas

Respuesta Más Útil

The first course of action is to double-check all 3 connections from the display assembly to the rest of the iPhone. Does this fix your problem?

If the connectors are in, it is possible that the display is bad.

It is also possible that the front panel was not the problem in the first place. What necessitated replacing the front panel?

Fue útil esta respuesta?

Puntuación 1
Agregar un comentario

Hi Ben,

The front panel was cracked, the phone still worked up until i have replaced the screen about an hour ago. So the phone should be ok? i have checked all 3 connections and reconnected. Still nothing when trying to turn on?

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Añadir tu respuesta

Jason estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 3

Ultimos 30 días: 9

Todo El Tiempo: 753