Repara tus cosas Comunidad Tienda

Procesador Intel Core i5 de doble núcleo a 2,6 GHz (Turbo Boost de hasta 3,2 GHz) con 3 MB de caché L3 compartida. Lanzado el 13 de febrero de 2013.

Preguntas 120 Ver todo
Pregunta Cerrada

Opciones

Where are the power pads on this early 2013 MacBook Pro Model?

Since this Macbook Pro model is so new, I cannot find any pictures/information on where the power pads on the Model A1425 (early 2013) Macbook Pro logic board... Any help (especially with pictures) would be greatly appreciated!

Thanks!

UPDATED: Here are the photos of my logic board that I added below in my post. If someone could point out the two specific locations where a short is needed to power my MacBook on, it would be a godsend!!

Block Image

Block Image

Block Image

Update

I don't know where the keyboard connector is on the logic board. Do you have a photo? I don't have the exact configuration shown in the link you gave me on my logic board.

ADDED: Photos are from my MacBook's logic board below. If anyone can point out where I need to short to power my MacBook on, it would be greatly appreciated. Thank you!

Block Image

Block Image

Block Image

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 0
Agregar un comentario

2 Respuestas

Filtrar por:
Mas Útiles Más Reciente Más antiguo
Respuesta Más Útil

Opciones

John, just like machead3 mentioned, this can cause damage. Anyhow you need to shorten pin 5 (keyboard on/off) to ground. On the connector ground is pin 29 but you can use the metal standoffs since they are easier to touch and locate. Hope this helps, good luck.

Block Image

Fue útil esta respuesta?

Sí No
Puntuación 5

5 comentarios:

How do you shorten the pin ?

- de

I use a jumper lead (a wire with clips at the ends) which is holding a sewing pin as its probe on one end to touch the solder pad as needed and the other in this case a metal frame stand off.

- de

If you are also working on an A1425 retina, you're asking the wrong question because this machine turns itself on automatically when you attach a functioning charger. The charger is your power button! If you plug the charger in and it does not instantly turn on - something is wrong. Start by unplugging everything besides the dc in board and the fan, now plug the charger in. What happens?

What's on PPBUS_G3H? PP3V42_G3H? PP5V_S4? What led up to it not turning on?

- de

If someome knows what is PPBUS_G3H, they won't be asking the question.

- de

Ok, you fix their motherboard then. Have fun.

- de

Agregar un comentario

Opciones

See this Answer. Be aware that force starting a machine can cause damage.

If this answer is acceptable please remember to return and mark it.

Fue útil esta respuesta?

Sí No
Puntuación 1
Agregar un comentario
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 7

Ultimos 30 días: 15

Todo El Tiempo: 9,360