Repara tus cosas Comunidad Tienda

Modelo A1224 / mediados de 2007 y principios de 2008/2, 2,4, o 2,66 GHz Procesador Core 2 Duo

Preguntas 549 Ver todo

Opciones

LCD screen backlight no power

I had to take a part my mac to change hard drive, i disconnected the lcd display backlight connecotrs and marked them.

Now when i try to start my imac again.. it seems to not get any power on the screen, also i am not sure the computer is botting up at all sonce i can see the fans going buit i dun hear the apple sound related to the boot up process.

Do the 4 connectors have a specific order i might have messed up?

Could it be something else? preventing the imac form booting up and energizing the screen?

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación -1
Agregar un comentario

1 Respuesta

Filtrar por:
Mas Útiles Más Reciente Más antiguo
Solución Elegida

Opciones

Yes could be any cable you disconnected, go over your connections again. Many times DIYers "think" they have solid connections when they are not square or complete.

If this answer is acceptable please remember to return and mark it.

Fue útil esta respuesta?

Sí No
Puntuación 1

1 comentario:

I have taken it apart several times, and checked the connections, besides all you need to disconnect for the screen are the 4 ac power connectors plus the data one, so i was wondering if there is a safe way to check the voltage on those connecotrs in a safe way since i have been told they are supposed to be very high power and a regular tester would not work.

I own a Fluke tester 77 series.. would it be safe to test them with it?

- de

Agregar un comentario

Añadir tu respuesta

Javier estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 5

Todo El Tiempo: 161