Placement order of diffuser sheets?

I'm replacing the screen on a friend's MBA (A1370). Upon removing the broken LCD from the bezel, The 3 sheets of plastic behind it fell out and spread on the floor. Is there a particular order these must be put back in? I'm guessing they must have an order of some sort. Otherwise it will be hit and miss, Trial and error.

Thanks in advance.

Contestado! View the answer Yo también tengo este problema

Es esta una buena pregunta?

Calificación 0
Agregar un comentario

¡Envío gratuito para todos los pedidos de más de USD100.00 o que contengan un Pro Tech Toolkit!

Visita Nuestra Tienda

¿Alguna vez arreglaste algo? Eso es genial.

Comparte tu historia de reparación con #SoyUnGenio

Todos somos Genios

Comparte tu historia de reparación con #SoyUnGenio

1 Respuesta

Solución Elegida

its a very difficult one to describe in words, but the white backing sheet is obviously first, then the thickest plastic sheet lines up with the LED strip at the bottom... then the last few need to be put in order as well. The one with a darker shade, and an almost matte finish is the last one, so the more metallic reflective one goes in-between the thicker one and the last one...

i hope this helps.

Fue útil esta respuesta?

Calificación 1

Comentarios:

I've got the same issue. I can't quite understand what order they go in. Can somebody help me with front to back placement - front being closest to the screen? Thanks.

por

Agregar un comentario

Añadir tu respuesta

Djdat estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 3

Últimos 30 Días: 12

Todo El Tiempo: 1,620